Snap Band Dust Collector Filter Bags PTFE membrane 17 oz Fabric Bag Filter
ECOGRACE All types of dust filter bags for dust collector system Various coatings and finishing on the fabrics of the dust filter bags can be applied to either side of the to enhance cleaning and efficiencies of dust collector system , as well as prolonging service life. Ground wire, anti-collapse rings, and other options can easily be incorporated into bag construction. can custom fabricate various types of attachments to work with your specific shaker mechanism, whether a loop, eyelet, grommet, or other device.
All types of dust filter bags for dust collector system Dust filter bags are carefully fabricated and sized to ensure ease of installation and change-out.
Generally, dust collector filter bags are designed to be mounted and gasketed firmly into place with a snap band, corded cuff, or clamp to ensure dust type seal.
The main type of dust filter bags including Nomex filter bag ,PPS filter bags ,P84 filter bag ,Polyimide filter bag ,PTFE filter bags ,Acrylic filter bags ,Polyester filter bags,dust filter bag ,bag filters,dust collector bags.
Applications:
1 Iron, steel mill, ferroalloy plant, refractory plant, foundry, power plant of
flue gas dedusting system etc.
2 . Wastes incinerator, coal fired boilers, fluid fluidized bed boiler flue gas
filter etc.
3 Asphalt mixing, building materials, cement ceramic, lime and gypsum
and other production sites.
4 Aluminum electrolysis, lead and tin, zinc, copper and other rare metal
smelting gas filtering,superfine material recovery, liquid and solid separation.
Specifications:
Media
Weight(g/m2)
Material
Weaving/Scrim
Thickness
(mm)
Temperature
continuous/Max
Surface treatment
Polyester filter felt
600g/m2
PE/PE
1.9
135 /150
singed on one side
Ployster,oil and water ,
dirt repellent finish filter
550g/m2
PE/PE
1.7
135 /150
singed on one side
oil and water repellent finish
cleanability supporting finish
How to choose material for filter bag with good price ?
Since every filter bag has its own characteristics and parameters, when we choose filter material for
dust collector filter bag, we have to know the following parameters :
(1) Working temperature
(2) Humidity
(3) Dust filter bag diameter
(4) Gas chemical properties
(5) Dust abrasiveness
(6) Filter’s mechanical parameters
2.How to assure the product quality?
We will send the sample for your confirmation first, and then produce thete filters according to your requirement.
3.Can you provide free sample ?
Normally, our sample fee is free if its value less than $10.
However, you have to pay us the courier cost like: DHL , FEDEX, UPS, TNT .
4.Generally, what is the delivery?
Normally , the order will be delivered within 2 weeks after your deposit.
6.How do I know when shall I need to replace the filter bags ?
Monitor the inlet pressure. The pressure drop across a bag rises as the active surface area is used up. When the pressure starts to raise faster the filter bag is almost used up and should be replaced . Up to different working condition , but a good rule of thumb is to change bags when you see 8-12 PSI pressure drop (the difference in pressure between the filter’s inlet and outlet).
7.How many times can I clean and reuse the filter bag?
Attempting to clean a filter bag will stretch the material. Some holes will get bigger and allow dust to get through. Other holes will get smaller, plug up faster, and start removing things from the product that are supposed to stay in it.
8.Do you offer volume /d istributor discounts?
We do offer volume discounts, but that is based on the quantities ordered and frequency of orders. Contact us in regards to volume discounts and we will gladly give you more details.
9.What shipments are available?
Normally, we ship goods by sea , air or express. Special requirement can also be acceptable.
(1) By sea: to your nearest sea port
(2) By air: to your nearest air port
(3) By express: ( UPS,DHL.FEDEX,TNT…) Door to door
