High Temperature Fiberglass Filter Bags / Dust Collector Filter Bag
Detailed Product Description
Fiber:
Fiberglass
Weight:
600g/m2
Thickness:
1.2mm
Typical Load@ Peak:
MD: 210, XD: 140
Liner Shrinkage @ 230 Degree:
MD: 2%, XD: 2%
Maximum Operation Tempertion:
260 Degree
Maximum Surge Temperature:
280 Degree
Abrasion Resistance:
Excellent
Brief Introduction of Fiberglass Filter Bags:
Fiberglass filter bag has a long service for the following three reasons, one is its excellent heat resistance. Its maximum temperature is 260 degree and maximum surge temperature is 280 degree. Second is its good performance of abrasion resistancce. And the third but not the end is its stable chemical properties, which allow it stay non-reactive in the bad environment of strong acids and alkalis.
Characteristic of Fiberglass Filter Bag:
1, Fiber: Fiberglass
2, Thickness: 1.2mm
3, Mechanical Finish: ePTFE member
4, Max Operation Temperature: 260 degree
5, Max Surge Temperature: 280 degree
6, Heat resistance: Excellent
7, Abrasion Resistance: Excellent
8, Application: Furnace Flue gas filtration
Performance:
1, Excellent high temperature gas resistance.
2, Strong alkalis resistance.
3, Poor hydrolysis resistance.
4, Long service life.
5, High dust collection filtration efficiency.
Technical Information of Fiberglass filter bag
Article Name
Fiberglass filter bag
Ingredients
Fiber
Fiberglass
Scrim
Fiberglass
Weight
g/m2
750
Thickness
mm
1.2
Density
g/m³
0.28
Permeability
L/dm2.min
170
Tensile breaking
strength(N/5cm)
Warp
≥900
Weft
≥1400
Elongation @210N/5cm
Warp
<8
Weft
<10
Maximum shrink
of 90 mins
Temperature(°C)
280
%
≤2
Service Temperature(°C)
Continuous
260
Instant
280
Finishing
ePTFE member
Technical information about other materials
Media
Weight(g/m2)
Material
Weaving/Scrim
Thickness
(mm)
Temperature
continuous/Max
Surface treatment
Polyester filter felt
600g/m2
PE/PE
1.9
135 /150
singed on one side
Polyester,oil and water ,
dirt repellent finish filter
550g/m2
PE/PE
1.7
135 /150
singed on one side
oil and water repellent
finish
clean-ability supporting
finish
Polyester+anti-static
550g/m2
PE/PE
1.7
135 /150
singed on one side ,
anti-static
PPS
high-temperature
resistant
550g/m2
PPS/PPS
1.7
190 /200
singed on one side
PTFE high-temperature
resistant corrosion
prevention
700g/m2
PTFE/PTFE
1.2
250 /280
singed on one side ,
corrosion prevention
Polyester+PTFE
membrane
550g/m2
PE/PE
1.7
135 /150
singed on one side,
PTFE membrane
P84 high-temperature
resistant
550g/m2
P84/P84
2.8
240 /260
singed on one side
corrosion prevention
FMS high-temperature
resistant
550g/m2
FMS/FMS
2.2
200 /200
singed on one side
Technical Information about Other fIlter Bags
Dust collector
filter bag
Continuous
temperature
Peak
Temperature
Description
Resistance
to Acids
Resistance
to Alkalis
Resistance to
Oxidation
PH Value
PP filter bag
90℃
95℃
PP
Excellent
excellent
restricted
1~14
Acrylic filter bag
120℃
140℃
DT
good
good
good
3~11
Polyester dust
filter bag
130℃
150℃
PE
restricted
moderate
good
4~12
PPS filter bag
190℃
210℃
PPS
Excellent
excellent
moderate
1~14
Polyimid filter bag
240℃
260℃
P84
good
moderate
good
3~13
PTFE 100%
filter bag
240℃
260℃
PTFE
Excellent
excellent
excellent
1~14
Fiberglass
Filter bag
260℃
280℃
BQ
good
good
good
3~11
Brief Introduction of Our Manufactory
We are a manufactory, which was set up on 2008. We have a team of technical engineers, who have more than ten years experience in the filter bags and dust collector. Our products enjoy a good reputation in and out of our country for highly qualified and compentitive price. To develop a lonng-term business relationship with customers, we pay quite lot of attention to the service. To provide the best service as we could, we also provide “DIY” service, which means we will design a dust collector according to customer’s working condition. What’s more, we still have oversea service available.
